Lightning is perhaps the most spectacular display of the awesome force and raw power of nature. It's also the most dangerous and frequently-encountered weather hazard that most people experience each year, according to the National Severe Storm Laboratory.
Considering a single bolt of lightning can carry over 100 million volts of electricity, it's not surprising that it can cause damage to homes in a number of ways:
- A direct strike to a structure can rip through roofs and chimneys, explode brick and concrete, and ignite fires.
- An indirect or secondary lightning strike to a nearby tree or power line can induce unwanted surges into a home.
- Lightning can also enter through phone, cable lines, and computer modems, as well as roof projections such as weather vanes, antennas and satellite dishes.
- Home extras like irrigation systems, invisible fences, and electric gates can provide a low-resistance pathway for lightning's destructive energy.
Protecting your home
Each year thousands of home and other properties are destroyed or damaged by lightning strikes. The first step to protecting your home is contacting a professional who is qualified to design and install a certified lightning protection system. It will be designed to control or force the discharge onto a specified path, thereby eliminating the chance of fire or explosion within non-conductive parts of the house such as those made of wood, brick, tile, etc. A lightning protection system is not intended to prevent a strike. Its purpose is to provide a safe path on which the current can be safely directed to the ground.
Keep in mind this is not a do-it-yourself project. Only experienced and reputable lighnting protection contractors listed by Underwriters Laboratories (UL) listed and certified by Lightning Protection Institute (LPI) should install these systems. Qualified specialists use UL-listed materials and ensure that methods of installation comply with nationally recognized safety standards of LPI, UL and the National Fire Protection Association (NFPA).
A typical lightning protection system
A complete system is made up of the following components:
- Air terminals: Also referred to as lightning rods, these inconspicuous copper or aluminum rods are vertically mounted on the roof at regular intervals. The air terminals serve as strike receptors, designed to intercept the lightning strike.
- Main conductors: Constructed of aluminum or copper, these braided cables connect the air terminals to the other system components and the grounds.
- Grounds: A minimum of two ground rods, driven at least 10 feet deep in the earth are required for all structures. The ground terminations direct the dangerous current into the ground, to eliminate the chance of injury or damage to the structure.
- Bonds: Bonding joins metallic bodies (roof components) and grounded building systems to the main conductor to ensure conductivity and prevent side flashing (lightning jumping between two objects).
- Surge arresters and suppressors: A surge is an increase in electrical current due to a lightning strike on or near a power line or utility service. Surge suppression is installed at the electrical panel(s) to prevent the entrance of overvoltages which can cause a fire. Arresters installed at electrical panels help protect heavy appliances and prevent fires at service panel entrances. Additional devices may be needed to protect other in-house electronics. Surge protection devices are typically installed in conjunction with a lightning protection system.
- Tree protection: The Lightning Protection Institute recommends that any tree taller than a home or within 10 feet of the structure be equipped with a lightning protection system. Trees do not offer protection and many homeowners choose to have trees protected for their own value. An unprotected tree in close proximity to a structure can also create a side-flash hazard to the nearby home.
State Farm® (including State Farm Mutual Automobile Insurance Company and its subsidiaries and affiliates) is not responsible for, and does not endorse or approve, either implicitly or explicitly, the content of any third party sites hyperlinked from this page. State Farm has no discretion to alter, update, or control the content on the hyperlinked, third party site. Access to third party sites is at the user's own risk, is being provided for informational purposes only and is not a solicitation to buy or sell any of the products which may be referenced on such third party sites.
The information in this article was obtained from various sources not associated with State Farm®. While we believe it to be reliable and accurate, we do not warrant the accuracy or reliability of the information. These suggestions are not a complete list of every loss control measure. The information is not intended to replace manuals or instructions provided by the manufacturer or the advice of a qualified professional. Nor is it intended to effect coverage under our policy. State Farm makes no guarantees of results from use of this information.